Sheet and Plate
We can offer sheet and plate in the following dimensions. Please note that special properties/limitations specific to the material may apply. If your preferred dimensions are not listed, please get in touch. We will check the technical feasibility or arrange for alternatives if necessary.
Nickel alloys and special stainless steels
Delivery condition
| Thickness mm (inches) | Width mm (inches) | Length mm (inches) |
|---|---|---|---|
Cold rolled | 1-8 (0.04-0.31) | 1.000-2,4001) (39.37-94.5)1) | 12,0003) (472.4)3) |
Hot rolled | 3-100 (0.12-3.93) | <2,5002) <98.42) | 12,0003) (472.4)3) |
1) 2,500 mm on request (98.4 inches)
2) 3,100 mm on request (122 inches)
3) 12,500 mm on request (492.1 inches)
max. weight per piece 2.7 tonnes (up to 4.5 tonnes on request)
Zirconium
Thickness: 3-65 mm (0.12-2.56 inches)
Width: <2,500 mm (<98.43 inches)
Length: <8,000 mm (<315 inches)
Cutting
Tool/type
| Thickness max. mm (inches) | Width max. mm (inches) | Length max. mm (inches) |
|---|---|---|---|
| Scissors | 18-20 (0.71-0.79) | 5.200 (204.72) | 8.000 (315) |
Plasma cutting | 80 (3.15) | 3.500 (137.8) | 16.000 (630) |
| sawn | 140 (5.51) | 6.000 (236.2) | 6.000 (236.22) |
Parts per drawing on request
Contact
Quality control
Sheet and plate made by VDM Metals pass through especially stringent quality control. At a very early stage, we established quality assurance as the overriding principle and developed it into a quality management system with in-process checks and inspections. This is closely linked to our continuous improvement processes for optimising all operating procedures.